Categories
over NT$4688 get 5% off on order
Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
Unique features
Sculptable by applying heat
Use a heat gun to project a temperature of ± 70°C to the part of the SKULPT 3D printed object which requires finetuning by sculpting and/or remodeling
Easily smooth out visible 3D printed layers and imperfections caused by blobs, zits and removed support structures
Very easy to paint with acrylic paints
SKULPT 3D printed object only has to be degreased with soap and lukewarm water before painting
SKULPT 3D printed objects can be polished
Repeatedly sculptable and reusable
SKULPT 3D printed objects can continuously sculpted by remodeling, carving, cutting, adding extra material SKULPT material, etc…
Leftover support structures can be reused for sculpting
Does not dry out or crack
Self-supporting
3D print support structures with the same SKULPT 3D printer filament as used for the primary objects as the object can perfectly be smoothed out and leftover support material can be reused for sculpting
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.2mm | Flow rate: ± 110 - 121% * |
Print temp: ± 190 - 220° C * | Print speed: Medium | Retraction: Yes ± 1.5 - 3mm |
Heat bed: ± 45 - 60° C * | Fan speed: 100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) For printers that use a 2.85mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is ± 200 - 220° C (benchmarked on Ultimaker 2. For printers that use a 1.75mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is ± 190 - 210° C (benchmarked on Prusa I3 MK2).
*) The heated bed should be set at 60° C for 3D printing the first layer of your SKULPT 3D printed object and then lowered 45° C for 3D printing the remainder of your SKULPT 3D printed object .
*) When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 2.85mm SKULPT filament it is recommended to increase the flow rate to ± 121% (benchmarked on Ultimaker 2). When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 1.75mm SKULPT filament it is recommended to increase the flow rate to ± 110% (benchmarked on Prusa I3 MK2).
Instructions and tutorials
Filament length
ρ: 1.26 g/cc | 50 gr coil | 0.75 Kg spool | |||
Ø 1.75mm | ± 16.5m | ± 247m | |||
Ø 2.85mm | ± 6.2m | ± 93m |
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products
美道家國際Le 3B成立於2007年,早期專注進口歐美各國飾品及生活用品於PChome商店街販售,近年來因3D列印蓬勃發展且公司本身亦投入相關教學工作,有鑑於國內3D列印線材僅能找到國內或對岸廠商的產品,而且種類有限且品質不一,特於2017年初成立『my3DP』3D列印網站,除讓國內3D列印的創客們或教育單位能快速掌握全球3D列印的最新動態,並且能輕鬆購得歐美各國不同類型的高品質、特殊的3D印表機線材及相關周邊,以因應各種不同的需求。
~my3DP, my 3D world~
~我3D印表機,我的3D世界~
訂購與運送說明
連絡電話:N/A
電子郵件:Service@le3b.com.tw
服務中心:桃園市桃園區中正路(內部整理中,僅接受預約)
退換貨政策
隱私條款 | 條款及細則 | 2018 © my3DP